Hydrostatic Level Transducer


Output Signal



0.5 – 4.5V

0 – 13mH2O


4 – 20mA

0 – 10mH2O

Product Detail

Product Tags

Product Overview

The Hydrostatic Level Transducer from Heda is designed for sewage waste water level measurement with a standard range for 10 meters. And since tap water causes much less corrosion than waste water, this transducer is suitable for water level measurement in water tanks, water reservoirs, water wells, too. To withstand challenging environment like waste water, the enclosure is made from 316L stainless steel, while the cable jacket is made from polyurethane. It works more like a gauge pressure sensor in order to prevent the measurement from being affected by atmosphere pressure change.

With either 4 – 20mA or 0.5 – 4.5V output, this level transducer can be easily connected to different types of data acquisition devices. Data loggers, RTU’s from Heda would work smoothly with this transducer.

Product Features

IP68 rated.
      • Stainless steel enclosure, polyurethane cable jacket.
      • Low power consumption. Current draw is no more than 20 mA.
      • Optional output signal, 0.5 – 4.5 V or 4 – 20 mA.
      • Standard measurement range 0 – 10mH2O. Customized range supported.
      • Integrated surge protection.
      • Standard cable length is 10 meters. Cable length can be customized.
▞ Applications

Water level measurement for sewage manhole shaft, or water tank, water reservoir in water supply networks, or pond, small river, etc.

▞ Dimensions


  • Previous:
  • Next: